The Ignition Module is connected to the PCIII USB with it’s built in expansion port link and communicates via a CAN interface. As in the case of the Power Commander, the Ignition Module uses OEM style connectors to plug in-line of the stock ignition harness so no cutting or splicing is required.

The Ignition Module uses “direct coil driver technology” and allows a high degree of timing adjustment. In the Power commander Control Center Software the user is able to advance or retard the ignition curve up to 10 degrees based on throttle position and RPM. It is also possible to alter the timing for each cylinder individually if necessary.

The graph on the left represents timing adjustments with Ignition Module. The graph on right represents increased Rev Limit for certain bike models.
The Ignition Module comes standard with no adjustments made in the map for the timing table. Due to different states of tune, fuel quality, and engine modifications we found it is best to leave the ignition timing stock for safety reasons. To have your ignition curve fine tuned Dynojet recommends bringing your bike to one of our Authorized Power Commander Tuning Centers. These centers have the necessary dynamometer equipment to extract the most performance out of the Ignition Module.

On motorcycles that have eight injectors and were not previously able to benefit from the use of the Dynojet Quick Shifter, the Ignition Module now allows this functionality. The Dynojet Quick Shifter is connected to the expansion port between the Ignition Module and the PCIIIusb. For more information about the Dynojet Quick Shifter click here.

On select models of bikes our Rev Xtend feature is available when using the Ignition Module. Rev Xtend makes it possible to increase the RPM limit from the factory setting. This feature is intended to be used on engines that have been modified to allow the increased RPM limit.

This feature can only be enabled on the following models:

Honda	Kawasaki	Suzuki	Yamaha
00-01 CBR929	06-08 ZX14	04-05 GSXR600	02-07 R1
02-03 CBR954	06-07 EX650R	04-05 GSXR750	06-07 YFZ1
01-06 F4i	04-07 VN2000	03-07 SV-650	06-07 YZF600R6
02-08 VTX1800	03-04 ZX6R	03-07 SV-1000	07-08 XV1300
03-04 CBR 600RR	04-07 Z750	01-04 GSXR1000	02-08 Warrior
05-06 CBR 600RR	03-07 Z1000	02-06 GSX1300R
07-07 919 (Hornet 900)	04-07 ZX10R
	00-05 ZX12R
	2003 ZX6RR

Harley Davidson Rev X-Tend/Start Fuel >>

In order to activate this feature you must first download, fill out, and sign the waiver below. Once completed it needs to be faxed to Dynojet Research Inc. at 702 399-1431.

• Rev Xtend Request Form

In Advanced mode, with the Ignition Module installed, both fuel and ignition timing adjustments can be made separately for each cylinder.