LCD Display

Power Commander LCD Unit

Product Overview

The LCD Display connects to any Power Commander (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.

NOTE: Your Power Commander's firmware may need to be updated to use this device.

Easy Installation & Mounting

The new LCD Unit can easily be mounted with TECHMOUNT accessory mounting systems. For a complete guide of TECHMOUNT accessory mounting systems, please visit: TECHMOUNTS.COM

LCD Unit Product Gallery

LCD Unit mounted on Handlebars

Additional Features and Capabilities

Easy Removal, Mounting and Programmability

The unit can be removed easily from the bike and programmed with a desktop computer. Maps can be downloaded, stored and the data viewed with the supplied software. As new functions, screen and features become available the unit is “user upgradeable” using the supplied USB cable and free downloads available in this site under downloads and map downloads.

Connect LCD Unit to Wideband Commander (Power Commander III USB Only!)

The new LCD Unit can easily be connected to the Dynojet Wide Band Commander. via a Harness cable. This cable is a replacement for the standard LCD cable which enables the user to connect to a Wide Band Commander. With this cable connected the LCD is able to display actual air/fuel readings and any accessory input connected to the WBC.

Power Commander LCD-100 Unit Features

Can be connected to Power Commander III usb and/or Wideband Commader units
Convenient touch screen
View live channel data: RPM, TP%, duty cycle, fuel change, ignition change, & Air/Fuel Ratio (w/Wideband Commander connected)
Display map position with hub
Calibrate TP s
Adjust fuel trims – Low – Mid – High
Able to store multiple maps and send them on the fly to the Power Commander (requires user supplied SD card, 1gb max)
Quick Shifter configuration
USB programmable, and upgradeable
Comes with Display File Manager software

Power Commander LCD-200 Unit Features

Can be connected to Power Commander V, WideBand2, AutoTune, CMD and CMD Marine units
Convenient touch screen
View live channel data RPM, TP, map position (when using map switch), duty cycle, fuel change, ignition change & Air/Fuel Ratio (w/WB2 or AutoTune connected)
Adjust fuel trims – Low – Mid – High
Able to store multiple maps and send them on the fly to the PCV* and CMD Marine units (requires user supplied SD card, 1gb max)
Log data information
Play back logs in the LCD as well as view them in Excel and other programs
Able to see gear position and wheel speed
Calibrate TP%, Speed, Gear, Analog input configuration for boost, engine temp, etc
Performs the WideBand2 sensor test
Adjust Lambda Smoothing
USB programmable, and upgradeable
Comes with Display File Manager software
* will not send SFM maps