LCD AND HUB FIRMWARE REQUIREMENTS
Power Commander Unit Requirements
For the Multi-Function Hub to operate properly with the PCIIIUSB you will need to
update the PCIII USB to firmware version 2.1.2 or higher and use software version
3.1.8 or higher.
Determine your Current Firmware Version
- To determine your current firmware version go to VIEW - POWER COMMANDER INFO in
the Control Center software. If your current firmware is version 1.0.0.20 or higher
then you can update your firmware by going to POWER COMMANDER TOOLS - UPDATE FIRMWARE.
The firmware needed for use with the Hub can be downloaded from the enclosed CD
or our website, www.powercommander.com.
If your firmware version is 1.0.0.19 or lower then you will need the firmware programmer to update your PCIII USB. This programmer can be found in some Ignition Modules or the HDREV kit. You can also purchase part #PCPROG which will give you all the necessary software and hardware to update your Powercommander.
Download your Power Commander Firmware